Vol 65. № 3. 2023

«Scientific Journal of the Far Eastern State Technical Fisheries University». Vol. 65. No 3. 2023

FOOD SYSTEMS

Review article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-01

Analysis of the information system of the data bank «Products of Russia»

Anna L. Blinova
Far Eastern State Technical Fisheries University, Vladivostok, Russia
Senior Lecturer of the Department of Technical Systems Management, SPIN-code: 4170-6407, AuthorID: 1196497
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. The principle of accessibility of documents in the field of standardization for all interested parties is established at the legislative level. With regard to standard products, this principle is observed: the documents for its manufacture are freely available on the Internet.

Technical specifications and standards of organizations are the intellectual property of their developers. To make information about domestic products manufactured according to these documents available to manufacturers, suppliers, as well as authorities, a data bank "Products of Russia" has been created. With its help, the problem of collecting, processing and communicating to users reliable information about domestic products to ensure the activities of enterprises, as well as the implementation of public procurement, is solved. The relevance of the data bank information is of particular importance in the context of sanctions from foreign countries that have violated established relations with suppliers.

This article discusses what information is contained in the data bank "Products of Russia", who performs the function of forming and maintaining the data bank and what opportunities it can give to interested users.

Keywords: data bank «Products of Russia», technical specifications, catalog sheet, FSBI «Russian Institute of Standards», regional centers of standardization and metrology

© Blinova A.L., 2023
For citation: Blinova A.L. Analysis of the information system of the data bank «Products of Russia». Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):6–12. (in Russ.).
The article was submitted 19.07.2023; approved after reviewing 15.09.2023; accepted for publication 25.09.2023.

Review article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-02

Analysis of legal and regulatory documents on metrological support of various objects

Abstract. One of the goals of modern production is the production of high-quality competitive products through the introduction of innovations and advanced technologies. The quality of products directly depends on the metrological support of production, as a type of technical support that allows for high-quality measurements of product parameters with a given accuracy and reliability of results.

Metrological activity is regulated by legal and regulatory documents both in the field of ensuring the uniformity of measurements and technical regulation, including standardization. The analysis of documents on metrological support of objects found non-compliance in the content of a number of standards, therefore, the harmonization of standardization documents with the legislation of the Russian Federation in the field of activity under consideration is an urgent action.

The article presents proposals to clarify the concept of "metrological support", and also defines the importance of metrological support in metrological activities.

Keywords: metrological support, technical regulation, documents in the field of standardization, conformity assessment, measurements

© Blinova A.L., 2023
For citation: Blinova A.L. Analysis of legal and regulatory documents on metrological support of various objects. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):13–18. (in Russ.).
The article was submitted 14.07.2023; approved after reviewing 15.09.2023; accepted for publication 25.09.2023.

Origrnal article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-03

Using the IDEF0 functional model in the process of developing integrated management systems for fishing industry enterprises

Evgenia P. Lapteva¹, Lidia A. Doskach²
^{1, 2} Far Eastern State Technical Fisheries University, Vladivostok, Russia
¹ PhD in Engineering Sciences, Associate Professor, Associate Professor of the Department of Technical Systems Management, SPIN-код: 6729-7689, AuthorID: 364951, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., http://orcid.org/0000-0002-5360-5594
² Master^,s degree student of the STm-212 group, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. In the article «Methodological support of an integrated quality management system for enterprises in the fishing industry» in order to improve the methodological approach in creating an integrated management system (IMS) at enterprises in the fishing industry, the article determined the procedure for organizing work to establish requirements for IMS. As a result, a flowchart of the process of establishing requirements for an integrated management system was built. In this article, the IDEF0 methodology was considered as another way to improve methodological support in the process of developing an integrated management system for fish industry enterprises. According to the results of the previous study, the developed algorithm for organizing work on establishing requirements for IMS was detailed and concretized using a functional model. The result of this work was the construction of a functional model IDEF0 «Procedure for organizing work to establish requirements for IMS».

Keywords: integrated management system, food safety management system, environmental management system, IDEF0 methodology

© Lapteva E.P., Doskach L.A., 2023
For citation: Lapteva E.P., Doskach L.A. Using the IDEF0 functional model in the process of developing integrated management systems for fishing industry enterprises. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):19–28. (in Russ.).
The article was submitted 21.09.2023; approved after reviewing 23.09.2023; accepted for publication 26.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-04

Development of recommendations to minimize the measurement inaccuracy of liquid food consumption in the food industry

Egor G. Timchuk
Far Eastern State Technical Fisheries University, Vladivostok, Russia
PhD in Engineering Sciences, Associate Professor, Associate Professor of the Department of Technical Systems Management, SPIN-код: 8836-6556, AuthorID: 987987
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., http://orcid.org/0000-0003-2473-2081

Abstract. One of the most significant controlled indicators of liquid food products, such as dairy or juice products, is their consumption. The problem of measuring the flow of liquid food products is their tendency to foam when moving in pipelines. The resulting foam negatively affects the accuracy of liquid food flow measurement tools, which worsens the quality of finished products due to a decrease in the accuracy of technological standards and reduces production efficiency.

Therefore, this article is devoted to recommendations on equipping food production facilities to minimize the error in measuring fluid flow. For this purpose, the analysis of methods for inhibiting the foaming process in liquid foods was carried out, an experimental setup was developed, errors in measuring the flow of liquid in the experimental setup were estimated and recommendations were formalized.

Keywords: food industry, minimization of flow measurement error, recommendations

© Timchuk E.G., 2023
For citation: Timchuk E.G. Development of recommendations to minimize the measurement inaccuracy of liquid food consumption in the food industry. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3): 29–33. (in Russ.).
The article was submitted 15.09.2023; approved after reviewing 20.09.2023; accepted for publication 26.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-05

On the problems of processing fish waste in the production of fish feed meal and possible solutions

Tatyana I. Tkachenko¹, Marat A. Grishkov², Maxim R. Yatsenko³
^1,3 Far Eastern State Technical Fisheries University, Vladivostok, Russia
² LLC «Extrusion equipment», Vladivostok, Russia
¹PhD in Engineering Sciences, Associate Professor, Head of the Department of Technological Machines and Equipment», SPIN-код: 5932-9472, AuthorID: 214372, Scopus Author ID: 57222473654, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., ORCID: 0000-0002-9210-2172
² e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
³ Master^,s degree student of the Department of Technological Machines and Equipment, SPIN-код: 8597-9477, AuthorID: 1194142, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., ORCID: 0000-0002-6833-4563

Abstract. The article deals with the problems of processing fish waste in the production of fish feed meal and possible ways to solve them. To optimize the screw pressing machine, a new technology for the manufacture of press screws is proposed - the technology of washer screws. The proposed modernization of the screw allows you to combine the following functions in the machine: separator, press and pump. The screw made according to the proposed technology has a number of advantages compared to screws made by turning from a solid blank or bushings.

Keywords: screw, fish meal, screw washers, feed meal, screw bushings

© Tkachenko T.I., Grishkov M.A., Yatsenko M.R., 2023
For citation: Tkachenko T.I., Grishkov M.A., Yatsenko M.R. On the problems of processing fish waste in the production of fish feed meal and possible solutions. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):34–39. (in Russ.).
The article was submitted 26.04.2023; approved after reviewing 07.09.2023; accepted for publication 27.09.2023.

FISHERIES, AQUACULTURE AND INDUSTRIAL FISHERIES

Origrnal article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-06

About mathematical tools used to solve practice-oriented tasks of organizational
and managerial orientation

Nina S. Ivanko¹ , Svetlana V. Lisienko²
^1,2Far Eastern State Technical Fisheries University, Vladivostok, Russia
¹ Senior Lecturer of the Department of Applied Mathematics and Informatics, SPIN-код: 6882-7377, AuthorID: 814886, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
² Doctor of Technical Sciences, Associate Professor, Head of the Department of Industrial Fisheries, SPIN-код: 6437-6364, AuthorID: 371990, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. When modeling fishing activities, problems related to the uncertainty and stochasticity of the fishing system are more often encountered. The influence of these factors is quite strong and cannot be ignored. In this regard, difficulties of different levels arise when using mathematical modeling. One of the solutions to these problems is the use of mathematical methods of decision theory, such as dynamic and linear programming and game theory.

Keywords: mining fleet, resource potential, aquatic biological resources, optimization, dynamic programming, linear programming, game theory

© Ivanko N.S., Lisienko S.V., 2023
For citation: Ivanko N.S., Lisienko S.V. About mathematical tools used to solve practice-oriented tasks of organizational and managerial orientation. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023;65(3):40–45. (in Russ.).
The article was submitted 22.09.2023; approved after reviewing 25.09.2023; accepted for publication 28.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-07

Features of long-term dynamics of Pacific cod Gadus macrocephalus Til. commercial stock in Kunashir Strait and in adjacent waters

Sen Tok Kim
Sakhalin Branch of the Russian Federal Research Institute of Fisheries and Oceanography («SakhNIRO»), Yuzhno-Sakhalinsk, Russia
PhD of Biological Sciences, Senior Researcher, Head of the Laboratory of Marine and Freshwater Fish
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. The purpose of this work was to characterize the biological and fisheries indicators of Pacific cod in the Kunashir Strait during 1998-2022. The main material was the data collected during the gill net fishery in the eastern (Russian) zone of the Kunashir Strait carried out by the fleet of small-tonnage vessels owned to Japanese fishing cooperative of the city of Rausu. It is shown that catch per unit effort for the Pacific cod in the waters of the strait have been declining for a long time, with minimum in 2016-2017. Subsequently, this parameter began to increase again. Standardized catch per effort for the Russian fleet fishery in the entire South Kuril region, on the contrary, was characterized by an upward trend, with the exception of the period 2016-2019, when there was a short-term decline. In recent years, the positive trend of catch per effort in the area has been associated with the specific annual dynamics of Pacific cod stock lived in the southern part of the Sea of Okhotsk, nearly Hokkaido Island. The new information makes it possible to observe current trends of fish resources changing and to clarify the fishing capabilities of the area in the nearest future.

Keywords: Pacific cod, gill-net fishery, Kunashir strait, standardized catch per unit effort, dynamics of resources

Acknowledgments: the author expresses his sincere gratitude to all the scientific staff of the Laboratory of Marine Commercial Fish of the Sakhalin branch of VNIRO, who contributed to the preparation of an extensive database and the implementation of scientific research on board fishing vessels.

© Kim Sen Tok, 2023
For citation: Kim Sen Tok. Features of long-term dynamics of Pacific cod Gadus macrocephalus Til. commercial stock in Kunashir Strait and in adjacent waters. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):46–61. (in Russ.).
The article was submitted 27.06.2023; approved after reviewing 07.09.2023; accepted for publication 26.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-08

Hydrobionts of the arctic belt of the Yana river basin

Alexander F. Kirillov¹, Lena I. Sidorova², Olga D. Apsolikhova³
^{1, 2}Yakut Branch of the Russian Federal Research Institute of Fisheries and Oceanography («YakutskNIRO»), Yakutsk, Russia
³ ^{RUE “Fish Industry Institute” of the RUE “Scientific and Practical Center of Belarus National Academy of Sciences for Animal Husbandry”, Minsk, Belarus}
¹ PhD in Biological Sciences, Associate Professor, Leading Researcher, SPIN-код: 3948-6848, AuthorID: 856924;e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
² Head of the laboratory, SPIN-код: 5096-7558, AuthorID: 856888; e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
³ PhD in Biological Sciences, Leading Researcher, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. The Arctic belt of the Yana River basin covers an area of 10.2 thousand km² and includes the river delta, 143 km long from the mouth, with 20.1 thousand lakes located in it with a total area of 1350 km². Lakes of the Arctic zone of the Yana basin play an important role in the formation of the fauna of aquatic, semi-anadromous, and anadromous fish. The ichthyofauna of the aquatic biota of this section of the river basin includes 21 species with subspecies, of which more than 70% in commercial fishing are fish of the Coregonidae. Zooplankton in the river is mainly represented by cladocera and immature stages of copepods, with a total biomass of 0.016 mg/m³; in lakes, the abundance and biomass ranged from 2840-202000 ind./m³ and 20.19-1759.2 mg/m³. River zoobenthos is represented mainly by oligochaeta, mollusks, chironomidae larvae, with a total biomass of 96.58 g/m³; in lakes, the total biomass of zoobenthos organisms is 44.28 g/m². According to the quantitative indicators and the qualitative composition of invertebrates, one can speak about the favorable state of the food base of the Arctic belt of the Yana basin. The ichthyofauna consists of freshwater, semi-anadromous and anadromous fish. The lakes are inhabited by pike, whitefish, whitefish, peled, arctic char, perch and nine-spined stickleback. Of the parasites, Diphyllobotrium latum, a source of transmission of diphyllobothriasis invasion to humans and animals, was found in peled. The types of aquatic biological resources mastered by industrial fishing include those that are used - vendace, muksun, nelma, broad whitefish, whitefish; the recommended catch volumes are tugun, dace, burbot, ruff, perch, pike and the predicted catch is omul, which is 57.1 % of the total species composition of the ichthyofauna of the Arctic belt of the Yana basin. The commercial catch is about 0.5 thousand tons or 87.7 % of the gross fish catch in the Yana basin as a whole.

Keywords: arctic belt, Yana River basin, ichthyofauna, zooplankton, zoobenthos, parasites, nutritive base

© Kirillov A.F., Sidorova L.I., Apsolikhova O.D., 2023
For citation: Kirillov A.F., Sidorova L.I., Apsolikhova O.D. Hydrobionts of the arctic belt of the Yana river basin. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):62–70. (in Russ.).
The article was submitted 04.05.2023; approved after reviewing 07.06.2023; accepted for publication 26.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-09

Pollock of the Sea of Japan: dynamics of distribution of production (catch)
quotas for industrial and coastal fishing in 2015–2022

Svetlana V. Lisienko
Far Eastern State Technical Fisheries University, Vladivostok, Russia
Doctor of Technical Sciences, Associate Professor, Head of the Departament of Industrial Fisheries, SPIN-код: 6437-6364, AuthorID: 371990
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. The article presents the results of the analysis of the distribution of volumes (quotas) of pollock production (catch) between fishing enterprises – users for industrial and coastal fishing in the fishing zone «Sea of Japan» of the Far Eastern Fisheries Basin from 2015 to 2022.

Keywords: quotas of production (catch), industrial and coastal fishing, fishing zone «Sea of Japan», total allowable catch, investment quotas, users of aquatic biological resources

© Lisienko S.V., 2023
For citation: Lisienko S.V. Pollock of the Sea of Japan: dynamics of distribution of production (catch) quotas for industrial and coastal fishing in 2015–2022. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023;65(3):71–81. (in Russ.).
The article was submitted 12.09.2023; approved after reviewing 14.09.2023; accepted for publication 27.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-10

Results of satellite monitoring of oil spills from ships of Tatar Strait

Margarita O. Marchenko¹, Roman S. Bessonov², Vyacheslav A. Dubina³, Irina A. Kruglik⁴
^1,2,3,4 Far Eastern State Technical Fisheries University, Vladivostok, Russia
^2,3 Pacific Oceanological Institute named after V.I. Il'ichev FEB RAS, Vladivostok, Russia
¹ Student, SPIN-код: 2159-7776, AuthorID: 1121929; e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
² Postgraduate Student, Senior Engineer of the Hydrological Processes and Climate Laboratory of the V.I. Il'ichev Pacific Oceanological Institute of the Far Eastern Branch of RAS, SPIN-код: 5874-8040, AuthorID: 1122533, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
3 PhD in Geography, Associate Professor, Head of the Hydrological Processes and Climate Laboratory of the V.I. Il'ichev Pacific Oceanological Institute of the Far Eastern Branch of RAS, SPIN-код: 7135-9553, AuthorID: 129445
4 PhD in Biology, Deputy Director of Academic Affairs of the Institute of Fisheries and Aquaculture, AuthorID: 90639

Abstract. Based on the results of radar imagery from Sentinel-1 satellites in 2021, an assessment was made of the extent of oil pollution from ships in the Tatar Strait of the Sea of Japan. The main characteristics of the discovered oil slicks are calculated and a map showing their location is presented. Spills were observed from March to October, mainly in the coastal fifty-mile zone. The total area of registered slicks exceeded 140 km², the maximum area being 58 km². The level of oil pollution from ships in the Tatar Strait was higher than in the exclusive economic zone of Japan and the Korea Strait.

Keywords: Sea of Japan, the Tatar Strait, satellite monitoring, SAR, Sentinel-1, oil pollution

© Marchenko M.O., Bessonov R.S., Dubina V.A., Kruglik I.A., 2023
For citation: Marchenko M.O., Bessonov R.S., Dubina V.A., Kruglik I.A. Results of satellite monitoring of oil spills from ships of Tatar Strait. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):82–90. (in Russ.).
The article was submitted 21.06.2023; approved after reviewing 07.09.2023; accepted for publication 28.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-11

Software for determination of physical and mechanical properties of synthetic fishing materials

Aleksandr A. Nedostup ¹, Alexey O. Razhev ², Pavel V. Nasenkov ³, Karina V. Konovalova⁴
^1,2,3,4 Kaliningrad State Technical University, Kaliningrad, Russia
¹ PhD in Engineering Sciences, Associate Professor, Head of the Department of Commercial Fisheries, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
² PhD in Engineering Sciences, Leading Researcher; e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
³ Head of the ERL of CAD Commercial Fisheries Technology Fishing Equipment; e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
⁴ Postgraduate Student of the Department of Commercial Fisheries, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. In the process of studying and predicting the physical and mechanical properties of synthetic fishing materials, mooring ropes, as well as to perform design and manufacturing procedures of rope and rope products, which are mixed, complex, form-modifiable structures or constructions, it is necessary so choose the fiber material and dimensions for each element of a given design. (This could be a fishing trawl, mooring and any other products that are used in the fishing, transport and other industries), so that the corresponding element resists the action of various kinds of applied external forces without the risk of collapse or loss of the shape given to it. Flexible structures with variable shape consisting of elastic threads, ropes and cords are characterized by the fact that in the process of their operation there is a redistribution of loads falling on the individual elements, so initially adopted safety factor n does not provide equal strength products and expedient use of the material used for its construction. Necessary strength of synthetic fish products and materials σ taking into account possibility of emergency conditions should be provided due to acting longitudinal loads T_x and longitudinal modulus of elasticity (product properties) E_x, geometrical dimensions: diameter d and length L, and it is also necessary to keep overload factor k_n to increase design strength of parts σ taking high tensile load T. In this scientific article, the authors suggest that it is also advisable to provide weak links in the design (for example, in the multi-depth trawl) so that their destruction unloads the gun and prevents its complete loss.

Keywords: software, computer program, physical and mechanical properties, fishing materials

Funding: The study was carried out as part of the state assignment on the topic "Development of physical, mathematical and predictive models for the operation of bottom and mid-water trawl systems".

© Nedostup A.A., Razhev A.O., Nasenkov P.V., Konovalova K.V., 2023
For citation: Nedostup A.A., Razhev A.O., Nasenkov P.V., Konovalova K.V. Software for determination of physical and mechanical properties of synthetic fishing materials. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):91–102. (in Russ.).
The article was submitted 07.04.2023; approved after reviewing 07.09.2023; accepted for publication 27.09.2023.

MARINE POWER PLANTS AND THEIR ELEMENTS (MAIN AND AUXILIARY)

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-12

Future expectations of the Primorsky Krai fishing industry through the fishing vessels age composition analysis

Vitalii V. Gannesen¹, Ekaterina E. Petrova²
^1,2 Far Eastern State Technical Fisheries University, Vladivostok, Russia
¹ Associate Professor, Associate Professor of the Department of Navigation, SPIN-код: 8351-9640, AuthorID: 812731; e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
² Senior Lecturer of the Department of Navigation, SPIN-код: 2621-0656, AuthorID: 1108787, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract. The world fishing industry, and especially the coastal countries one, is considered as one of the most important factors of the country food security and plays an important role in providing the population with food. Besides, this industry creates jobs along the whole chain from those who work on the design and construction of ships and equipment to those who are connected with the sale of products to the end consumer. The Far East is the main supplier of fish raw materials and finished products to the domestic market of the country. At the same time, the fishing industry is a structure-forming branch of all regions of the Far East, including Primorsky Krai. Fishery complex occupies one of the leading places in Primorsky Krai economy: fishermen produce one third of all industrial products of Primorsky Krai, two thirds of all fish products of the Far East and one third of all fish products of Russia. Extraction and processing of sea biological resources, as well as related economic spheres play an important role in general economy and social life of Primorsky Krai. This raises the question of how sustainable this industry is in the near future. This article is concern to the fishing industry perspective through the analysis of the age composition of fishing vessels registered in the PrimorskyKrai. It is noted that the average age of the sea fishing vessels fleet segment continues to grow. The aging fishing fleet is raising concerns about the safety of both vessels and crew.As a result of statistical analysis, age groups of ships were identified and the prospects for their operation were assessed.

Keywords: fishing vessel, life of the vessel, decommissioning

© Gannesen V.V., Petrova E.E., 2023
For citation: Gannesen V.V., Petrova E.E. Future expectations of the Primorsky Krai fishing industry through the fishing vessels age composition analysis. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):103–109. (in Russ.).
The article was submitted 16.06.2023; approved after reviewing 20.06.2023; accepted for publication 26.09.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-13

Results of experimental investigation of parameters work of process, dynamics of heat emission and temperature of flame in marine high speed diesel

Boris I. Rudnev¹, Olga V. Povalikhina²
Far Eastern State Technical Fisheries University, Vladivostok, Russia
¹ Doctor of Technical Sciences, Professor, Professor of the Department of Refrigeration, Air conditioning and Heat Engineering, SPIN-код: 2797-1790, AuthorID: 423385² Associate Professor, Associate Professor of the Department of Refrigeration, Air conditioning and Heat Engineering, SPIN-код: 9956-1129, AuthorID: 875839, e-mail: роvаliсhinа@mаil.ru

Abstract. Results of experimental investigation of parameters work of process, dynamics heat emission and temperature of flame in marine high speed diesel type 8 ChN 13/14 are pepresented. They respectable addition base of data for verification of mathematical models appertain to work of process modern marine high speed diesels.

Keywords: marine diesel, parameters of work process, dynamics of heat emission, temperature of flame

© Rudnev B.I., Povalikhina O.V., 2023
For citation: Rudnev B.I., Povalikhina O.V. Results of experimental investigation of parameters work of process, dynamics of heat emission and temperature of flame in marine high speed diesel. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):110–119. (in Russ.).
The article was submitted 26.09.2023; approved after reviewing 28.09.2023; accepted for publication 02.10.2023.

Original article
DOI: https://doi.org/10.48612/dalrybvtuz/2023-65-14

Thermal condition of details combustion chamber of marine high speed diesel

Abstract. Results of experimental investigation of thermal condition of details combustion chamber of marine high speed diesel type 8ChN 13/14 are represented. They gave of designers possibility on during design of new models marine diesel more reliable task boundary conditions from thermal condition of details combustion chamber by use of finite element method.

Keywords: marine diesel, combustion chamber details, thermal condition, boundary conditions

© Rudnev B.I., Povalikhina O.V., 2023
For citation: Rudnev B.I., Povalikhina O.V. Thermal condition of details combustion chamber of marine high speed diesel. Scientific Journal of the Far Eastern State Technical Fisheries University. 2023; 65(3):120–127. (in Russ).
The article was submitted 02.10.2023; approved after reviewing 04.10.2023; accepted for publication 05.10.2023.